Product Introduction
At present, there are dozens of flue gas desulfurization technologies, according to the desulfurization process whether to add water and desulfurization products of the wet and dry form, flue gas desulfurization is divided into: wet, semi-dry, dry three major categories of desulfurization process. Wet desulfurization technology is more mature, high efficiency, simple operation. The traditional limestone/lime-gypsum method of flue gas desulfurization process uses calcium-based desulfurization agent to absorb sulfur dioxide generated by calcium sulfite, calcium sulfate, due to its small solubility, it is very easy to form in the desulfurization towers and pipelines, scaling, clogging phenomenon. Bi-alkali flue gas desulphurization technology is developed to overcome the shortcomings of limestone-lime method which is easy to scale.
Desulfurization equipment working principle is: sulfur-containing gas in the turbocharged turbulence device under the action of high-speed rotation and diffusion of the state and the absorption of slurry formed by the enhanced turbulent mass transfer. The process of mass transfer is to make the gas-liquid emulsion layer, not only the chemical absorption and fast, the liquid film is always close to neutral, can make the whole process to maintain a very high and stable mass transfer rate, therefore, it is a very good low resistance and high efficiency desulfurization equipment!
The core of desulfurization equipment technology is: established on the basis of osmotic surface renewal theory, based on a number of vegetative flow mixing of strong mass transfer mechanism belongs to the use of liquid as a separating agent, from the gas, air or exhaust gas to separate the dispersed dust particles, soot and hazardous gases and to achieve the purification of the purpose of high and new technology with simultaneous dedusting and desulfurization, and its technology is characterized by: dust removal and desulfurization of the integration of low energy consumption, covers an area of small, simple, efficiency Significantly, low operating costs, non-clogging and non-scaling system operation is stable, less pressure resistance loss, applicable to a variety of solid sulfur agent (Ca0MgONa0HCaC03Na2C03NH3H20 industrial waste lye) and other advantages. In the domestic and foreign law dust removal desulfurization process technology, the leading level, and in the application of coal-fired industrial boilers, to achieve zero-emission performance. Desulfurization equipment in the coal-fired boiler desulfurization and dust removal industry, dust removal and desulfurization equipment is widely used, can be wet dust removal, wet de, but also dust removal and desulfurization and dust removal integration, the application of wet desulfurization and dust removal and flue gas purification of coal-fired chain boilers, desulfurization of sulfur dioxide is highly efficient, exhaust purification is thorough, applied in the kiln industry to remove hydrogen fluoride and the kiln tailgas acidic exhaust gas purification equipment, etc., and the pellet, the tailgas desulfurization of the sinter machine, the Desulfurization agent of waste ammonia purification efficiency is very high, the original flue gas S02 from 11000mg/m removed to below 120mg/m, widely used in the field of steel mill pellet flue gas, is a low resistance and high efficiency wet dust removal and desulfurization equipment and novel desulfurization equipment environmental protection products. Dust collector is the equipment used to remove the harmful dust in the gas phase, on the basis of which to increase the effect of desulfurization, is desulfurization dust collector.
Desulfurization equipment working principle is: sulfur-containing gas in the turbocharged turbulence device under the action of high-speed rotation and diffusion of the state and the absorption of slurry formed by the enhanced turbulent mass transfer. The process of mass transfer is to make the gas-liquid emulsion layer, not only the chemical absorption and fast, the liquid film is always close to neutral, can make the whole process to maintain a very high and stable mass transfer rate, therefore, it is a very good low resistance and high efficiency desulfurization equipment!
The core of desulfurization equipment technology is: established on the basis of osmotic surface renewal theory, based on a number of vegetative flow mixing of strong mass transfer mechanism belongs to the use of liquid as a separating agent, from the gas, air or exhaust gas to separate the dispersed dust particles, soot and hazardous gases and to achieve the purification of the purpose of high and new technology with simultaneous dedusting and desulfurization, and its technology is characterized by: dust removal and desulfurization of the integration of low energy consumption, covers an area of small, simple, efficiency Significantly, low operating costs, non-clogging and non-scaling system operation is stable, less pressure resistance loss, applicable to a variety of solid sulfur agent (Ca0MgONa0HCaC03Na2C03NH3H20 industrial waste lye) and other advantages. In the domestic and foreign law dust removal desulfurization process technology, the leading level, and in the application of coal-fired industrial boilers, to achieve zero-emission performance. Desulfurization equipment in the coal-fired boiler desulfurization and dust removal industry, dust removal and desulfurization equipment is widely used, can be wet dust removal, wet de, but also dust removal and desulfurization and dust removal integration, the application of wet desulfurization and dust removal and flue gas purification of coal-fired chain boilers, desulfurization of sulfur dioxide is highly efficient, exhaust purification is thorough, applied in the kiln industry to remove hydrogen fluoride and the kiln tailgas acidic exhaust gas purification equipment, etc., and the pellet, the tailgas desulfurization of the sinter machine, the Desulfurization agent of waste ammonia purification efficiency is very high, the original flue gas S02 from 11000mg/m removed to below 120mg/m, widely used in the field of steel mill pellet flue gas, is a low resistance and high efficiency wet dust removal and desulfurization equipment and novel desulfurization equipment environmental protection products. Dust collector is the equipment used to remove the harmful dust in the gas phase, on the basis of which to increase the effect of desulfurization, is desulfurization dust collector.